Networking
Configuring Routing
Cisco RV315W Broadband Wireless VPN Router Administration Guide
66
5
-
Passive Interface:
Determines how the RV315W receives RIP packets.
Click
Enable
to enable this feature on the port, or click
Disable
to disable
this feature.
-
Authentication:
Specify the authentication method for the port.
None:
Choose this option to invalidate the authentication.
Simple Password Authentication:
Choose this option to validate the
simple password authentication. Enter the password in the field.
MD5 Authentication:
Choose this option to validate the MD5
authentication.
STEP 4
If you choose
Network
for routing in the
RIP Advertisement By
area, you can
manually add RIP networks in the
RIP Networks
area. Click
Add
to add a new RIP
network.
STEP 5
Enter the IP address of the RIP network in the
Network Address
field.
STEP 6
Click
Save
to save your settings.
Viewing the Routing Table
To open the Routing Table page, click
Networking
>
Routing
>
Routing Table
. The
following information is displayed:
•
Destination LAN IP:
The IP address of the host or the network that the
route leads to.
•
Subnet Mask:
The subnet mask of the destination network.
•
Gateway:
The IP address of the gateway through which the destination
host or network can be reached.
•
Interface and Tunnel:
The physical port or VPN tunnel through which this
route is accessible.
