Using the Setup Wizard
Configuring Default LAN Settings
Cisco RV315W Broadband Wireless VPN Router Administration Guide
22
2
STEP 5
In the
Enable VLAN
area, click
Enable
when the ISP uses the VLAN ID to add the
tag to the users, and enter the following information:
•
VLAN ID:
Enter the tag of the VLAN ID.
•
802.1p Priority:
Enter the value of the 802.1p priority.
STEP 6
In the
MTU
area, choose
Auto
to use the default MTU size or choose
Manual
if you
want to specify another size. If you choose Manual, enter the custom MTU size in
bytes.
STEP 7
If you want to continue, click
Next
to proceed to the LAN Configuration page. If you
want to return to the previous page, click
Back
. If you want to exit the Setup
Wizard, click
Exit
.
Configuring Default LAN Settings
From the LAN Configuration page you can configure the default LAN settings of
the RV315W.
STEP 8
Enter the following information:
•
VLAN:
Select a VLAN from the drop-down menu. See
Configuring VLAN
Settings
for more information on configuring the VLANs.
•
IP Address:
Enter the subnet IP address of the default LAN.
•
Subnet Mask:
Enter the subnet mask of the default LAN.
•
DHCP Server:
Click
Enable
to allow the RV315W to act as a DHCP server
and assign IP addresses to all devices that are connected to the LANs. Any
new DHCP client joining the LANs is assigned an IP address of the DHCP
pool. Click
Disable
to disable the DHCP server on the RV315W.
•
Start IP:
Enter the starting IP address of the DHCP pool if you enable the
DHCP server.
•
End IP:
Enter the ending IP address of the DHCP pool if you enable the DHCP
server.
•
Lease Time:
Enter the maximum connection time in minutes that a dynamic
IP address is “leased” to a network user. When the time elapses, the dynamic
IP address of the user is automatically renewed. The default is 0, indicates
that the lease time is 1 day.
