Cisco RF Gateway 1 Modules, Configuration Manual

Page: 54 / 286

Chapter 3 General Configuration and Monitoring
30 78-4025112-01 Rev H0
QAM RF Port Configuration
The QAM RF Port Configuration view shows RF Port Configuration parameters
from the Global QAM Configuration page. See the following screen.
Parameters
The following table describes the RF Port Configuration parameters.
Parameter Description
Card Index RF port card index on a particular card.
Example: 1/2 indicates card 1, port 2.
Port Index RF port index on a particular card.
Encoding Type ITU standard.
Service Group ID Alphanumeric service group identifier.
Channel Spacing The spacing between the channel center frequencies of different
channels.
Modulation QAM output selected (256 or 64).
Channel Output Level QAM output. The range depends on other parameters.
Channel Symbol Rate Symbol Rate based on the QAM modulation and ITU standards.
Port Control
Allows you to turn the port on or off.
Combined Channels Allows you to configure the port for single/dual/quad channels.