![background image](http://html.mh-extra.com/html/cisco/rf-gateway-1-modules/rf-gateway-1-modules_configuration-manual_64976205.webp)
Steps To Take
78-4025112-01 Rev H0
181
Result:
The following page is displayed.
2
Configure Broadcast Scrambling parameter as Enabled/Disabled.
Result:
The following pop-up message is displayed.
3
Configure Dual Encryption Broadcast as Enabled/Disabled. This parameter is
editable, only if the Broadcast Scrambling parameter is set as Enabled.
Result:
The following pop-up message is displayed.
4
Click
Apply
to accept or Reset to abort.
Note:
Changing the broadcast scrambling parameter is allowed only if there are no
active sessions. Any change to these two parameters will trigger an automatic
configuration save and will reboot the RF Gateway.
Summary of Contents for RF Gateway 1 Modules
