Cisco RF Gateway 1 Modules, Configuration Manual

Page: 222 / 286

Chapter 13 Encryption and Scrambling
198 78-4025112-01 Rev H0
Event Information Schedulers
The EIS provides the SCS with SCGs containing relevant information to scramble
services. To establish communication between the EIS and the SCS, a TCP
connection should be made followed by a channel set up. Once the connection is
made, the SCS of the RFGW-1 receives SCGs from the EIS. To set up a TCP
connection between the EIS and the RFGW-1, the EIS requires the knowledge of the
IP address and TCP port of the RFGW-1 used to establish the connection.
Adding an EIS
Follow the instructions below to add an EIS.
1 Navigate to the System/Scrambler page.
Result: The following page is displayed.
2 Click the + to expand the window and select EIS Configuration .