Cisco RF Gateway 1 Modules, Configuration Manual

Page: 22 / 286

Laser Safety
xx 78-4025112-01 Rev H0
The following laser safety precautions are applicable to the equipment. According to
the type of optical transmitter inside the equipment, there are different laser safety
precautions. A laser label that clearly indicates the laser aperture is affixed to the
equipment's rear panel.
The following illustration displays the location of the laser label.
Depending upon whether you are located in Europe (IEC-standard) or in the U.S.
(CDRH-standard), there are different laser safety precautions. For more information
about the equipment’s laser output, refer to the equipment's data sheet.
Class 1 and Class I Labels
The following illustrations show the class 1 and class I labels attached to the
housing, according to the standards.
In Accordance with the IEC Standard
The Laser type SFP modules used are classified in class 1 laser products according to
IEC 60825-1, 1997 amendment 2001.
The label below is attached to the top cover and the package of class 1 laser product.