Cisco RF Gateway 1 Modules, Configuration Manual

Page: 85 / 286

Monitoring the RF Gateway 1
78-4025112-01 Rev H0 61
Once the PID conflict is resolved at the headend device, then after refreshing the
session, the PID conflict alarm will be cleared. The state in the Input Monitor page
will also change to Active only after the session refresh is completed. Even if the
input PID conflict is resolved, but the session refresh button is not clicked, then state
in Input monitor page will remain as "Input PID conflict"
Data Monitoring
The Data Monitoring page provides information related to how data streams on the
input are bound to QAM resources on the input. The following illustration shows
the Data Monitoring screen.
Parameters
The following table explains the Data parameters.
Parameter Description
Output Channel The output channel for a data stream.
Type Type of data stream (DOCSIS MPT with UDP, DOCSIS MPT
without UDP, DOCSIS PSP with UDP, DOCSIS PSP without
UDP, MPEG, DATA).
GbE Input GbE input associated with the data stream.
Output Bitrate Bitrate of the data stream.
Destination IP Destination IP of the data stream.
UDP/DEPI Destination UDP or DEPI session ID for the data stream.
Status Status of the data stream (Stream Active, Stream Inactive).