Cisco RF Gateway 1 Modules, Configuration Manual

Page: 167 / 286

Blocked Unreferenced PIDS
78-4025112-01 Rev H0 143
Blocked Unreferenced PIDS
Unreferenced PIDs in MPTS and Data streams can be blocked by checking the
corresponding boxes of the QAM channels in the Block Unreferenced PID table.
By enabling the checkboxes in the PID table below, the following effects on the
MPTS and Data streams configured on the QAM channel will occur.
1 Block all the unreferenced PIDs of the MPTS and Data streams on a QAM
channel. This will include any standard SI PIDs coming along with the MPTS
streams.
2 Will not block the PIDs mentioned in the PID remap table in any of the QAM
channels.
3 If the operator needs to pass-through a specific Unreferenced PID after enabling
this Block Unreferenced PID, an entry can be added in the remap table with the
output PID values the same as the input PID value.