![background image](http://html.mh-extra.com/html/cisco/rf-gateway-1-modules/rf-gateway-1-modules_configuration-manual_64976043.webp)
Configuring QAM Output
78-4025112-01 Rev H0
19
To Configure Individual Carrier Output Parameters
1
Navigate to the
QAMS
page.
2
Expand the tree menu, and select the desired QAM Channel.
Result:
The
QAM Channel Configuration
window is displayed.
3
In the
Transport Stream ID
field, enter stream ID.
4
In the
Channel Spectrum Inversion
field, set the parameter to Normal (for most
applications).
Note:
The following table compares the RF Gateway 1 to an xDQA-24 with
respect to Channel Spectrum Inversion and its interpretation.
ITU Annex
Setting
xDQA-24 ITU
Setting
RF Gateway 1 ITU
Setting
ITU-A
Normal
Inverted
ITU-A
Inverted
Normal
ITU-B
Normal
Normal
ITU-B
Inverted
Inverted
ITU-C
Normal
Inverted
ITU-C
Inverted
Normal
5
In the
Channel PRBS Stuffing
field, set the parameter to On (for most
applications.)
6
In the
Channel Interleave Depth
field, select the interleave type.
7
In the
Channel PMT
Rate
and
Channel
PAT Rate
fields, enter desired playout rates.
8
Click
Apply
.
9
Click
Save
.
Summary of Contents for RF Gateway 1 Modules
