![background image](http://html.mh-extra.com/html/cisco/rf-gateway-1-modules/rf-gateway-1-modules_configuration-manual_64976117.webp)
Provisioning
78-4025112-01 Rev H0
93
If an MPTS entry is the only input stream routed to an output carrier, only
the Null PID (8191) needs to be specified in the blocked PID list. (All others
in the list should be set to -1 or removed.) However, if another MPTS or a
SPTS is going to be provisioned to mux out on the same carrier as this MPTS,
the PAT PID must be blocked by entering a 0 in the blocked PID list.
Blocking the PAT PID causes the PAT to be generated by the RF Gateway 1
and includes all programs routed to that output.
Up to 32 blocked PIDs can be specified in the blocked PID list including
unreferenced PIDs (e.g. PSIP or EMM PIDs) which are not present in the
PAT.
10
Click
Apply
.
11
Click
Save
.
Advanced Rules for Advanced Settings
Using advanced stream map generation, the operator can modify multiple rows to
the advanced settings on the stream map simultaneously.
Note:
We recommend working at the carrier level.
1
Navigate to the
Maps
page.
2
Expand the tree menu to select the desired QAM Channel.
Result:
The
Stream Map Table
is displayed.
Summary of Contents for RF Gateway 1 Modules
