Cisco RF Gateway 1 Modules, Configuration Manual

Page: 166 / 286

Chapter 9 Remapping Unreferenced PIDS
142 78-4025112-01 Rev H0
Adding Entries to the Remap Table
1 In the Unreferenced PID Maps tree, select the QAM channel which requires PID
mapping.
2 Click Add row in the Unreferenced PID Map Table and enter the value of Input
PID and required Output PID. You can add multiple rows. The maximum
number of remapping rows supported is 32 per QAM channel
3 If there is a need to block a specific PID in the stream, the operator can specify -1
at the Output PID Number column, effectively blocking the PID specified in the
Input PID Number column.
4 Click Apply .
5 Click Save.
6 The color coding descriptions are shown below.
a Yellow – The existing row values were changed
b Green – New row is being added
c Red – The row will be deleted when you click Apply.