Cisco RF Gateway 1 Modules, Configuration Manual

Page: 90 / 286

Chapter 3 General Configuration and Monitoring
66 78-4025112-01 Rev H0
Name Severity Description
Stream Dejitter Major One or more transport streams are present with excessive
jitter.
QAM Temperature Major A QAM temperature has exceeded an acceptable threshold.
QAM NCO Lock Major A QAM has lost NCO Lock.
Release Invalid Major Active system release is invalid.
DTI Backup Port Major Backup DT Alarm: Port failover or backup port not
connected in auto failover mode.
QAM
Oversubscribed Major Input rate on provisioned QAM BW exceeds QAM capacity.
License Major Unlicensed feature in use.
QAM General
Failure Major Combined temperature and voltage alarm.
QAM Initialization Major QAM card failed to initialize.
EIS Channel Closed
by Peer EIS channel connection closed by CA System.
EIS Connection
Lost Major EIS channel connection to CA System lost.
ECMG No Channel
Available Major No ECMG channel available.
ECMG Connection
Lost Major ECMG connection to CA System lost.
CW Stream Clear
Extension Major Clear extension alarm: Scrambling not started.
CW Stream CP
Extension no Comp Major CP extension due to mismatch between SCG and
components.
CW Stream CP
Extension no ECMs Major CP extension due to failure to receive ECMs.
ECM Stream PID
could not be
Allocated Major PID cannot be allocated or already in use.
GbE Port CRC Major CRC error threshold exceeded on GbE port.
Bind Failed Major Bind failed on EIS for socket port.
QAM Voltage Major QAM card over temperature threshold.
QAM Summary Major QAM card summary alarm, including UPX failure.
Input PID Conflict Major PID conflict is detected in the input stream
License Violation Major The upper 48 QAM channels require a DATA and/or a
POWERKEY, and/or a DVB license.