![background image](http://html.mh-extra.com/html/cisco/rf-gateway-1-modules/rf-gateway-1-modules_configuration-manual_64976057.webp)
QAM Card Configuration
78-4025112-01 Rev H0
33
QAM Channel Level Configuration
The QAM Configuration channel level view shows you QAM Channel
Configuration parameters from the Global QAM Configuration page. The following
illustration shows the QAM Channel Configuration screen.
Parameters
The following table explains the QAM Channel Configuration parameters.
Parameter
Description
Card Index
Identifies the QAM card.
Port Index
Identifies the RF port selected for the QAM card.
Channel Index
Identifies the channel number for the port on the QAM card.
Encoding Type
Refers to the ITU standard.
Original Network ID Original Network Identifier.
Transport Stream ID Allows you to change the Transport Stream ID.
Channel Mode
The Channel Mode can be normal, continuous or mute. The default
setting is always mute.
Channel Spectrum
Inversion
The spectrum can be configured as normal or swap.
Channel PRBS
Stuffing
Fills up stuffing packets with a Pseudo Random Binary Sequence. This
setting is recommended to enhance locking on a receiving device.
Channel Application
Mode
Allows you to choose the channel mode.
Channel Interleave
Depth
Allows you to choose the interleaving depth.
Channel PMT Rate
Default setting recommended.
Summary of Contents for RF Gateway 1 Modules
