![background image](http://html.mh-extra.com/html/cisco/rf-gateway-1-modules/rf-gateway-1-modules_configuration-manual_64976132.webp)
Chapter 6 Wideband Data Specific Operation
108
78-4025112-01 Rev H0
4
Select the
Allowable Ingress Ports
which receives the flows from the CMTS.
The correct GbE port (independent mode) or port-pair (port-pair mode) will
have its GbE port physical address (independent mode) or Video/Data IP
address (port-pair mode) under the System/IP Network web view configured to
match the eQAM IP address in the CMTS.
5
Enter the
Destination UDP Port
for the input stream to be mapped out to the
relevant RF Gateway 1 carrier. The Destination UDP Port must match the udp-
port of the corresponding rf-channel in the CMTS.
Notes:
–
Session ID will automatically set to "N/A" when Stream Type is MPEG.
–
For a given ingress port pair, the UDP port or session ID must be unique.
6
Click
Apply.
7
Click
Save
.
Summary of Contents for RF Gateway 1 Modules
