1
G528 Quick Start Guide
IoT Cellular Gateway
*Wi
-
Fi /Bluetooth
DC input
**RS
-
485
RS
-
232
*Wi
-
Fi
G528
WHAT
’
S IN THE BOX
Part number
!
Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and
documentation updates at
HARDWARE SETUP
1.
Unbox and verify the contents. Gather the accessories that you will need.
2.
Remove the SIM card from its packaging. Locate the SIM 1 slot on the unit.
To insert the SIM card, slide the latch for SIM 1 slot to the left and gently
push the SIM card (contact side down) all the way into the slot. Release the
latch.
Note
: The SIM card is pre
-
activated by Lantronix, but the APN may need to be
configured in the software. See
Quick Setup
.
3.
Attach the cellular / GNSS antennas to the antenna connectors and tighten
them securely.
4.
Optional: To enable Last Gasp, slide the battery switch to the left (ON). The
battery is charged while the device is connected to an external power input.
5.
Attach the Wi
-
Fi / Bluetooth antennas to the antenna connectors and tighten
them securely. If you
’
re using only Bluetooth, attach one antenna to the Wi
-
Fi / Bluetooth connector.
6.
Attach the 3
-
pin plug on the power cord to the DC input on the unit. Connect
the AC plug on the power supply to a standard AC receptacle.
7.
Observe that the Power LED is lit.
Model shown: G528GP2FS
Accessory
quantity
guides
Quick
Start
Guide
SIM
Insert
HARDWARE OVERVIEW
*Antenna selection will vary depending on your needs. **3
-
pin and 5
-
pin MICRO COMBICON plugs are sold separately.
USB
Front View
Ethernet (LAN, WAN/LAN #2)
LEDs
microSD
Last Gasp
SIM 1
SIM 2
*Cellular
main
*Cellular
diversity
*GNSS
**I/O connectors
Back View
LEDs
Alert
Red
Device alerts
User
Programmable 1
Blue
Software configurable
User
Programmable 2
Blue
Software configurable
Activity
Amber
Cellular data activity
Network
Amber
Cellular network status
Signal
Amber
Cellular signal strength
SIM
Blue
SIM in use
Wi
-
Fi
Blue
Wi
-
Fi network status
Power
Green
Power On or Off
Reset
(See G520 Series User Guide for details.)
5G + GNSS antenna
ACC
-
930
-
0296
-
00
4
-
in
-
1
2.4/5.8GHz Wi
-
Fi/Bluetooth antenna
A21H0
2
12VDC 12W Power supply (non
-
POE)*
ACC
-
520
-
0165
-
00
1
SIM card
N/A
1
Power cord
ACC
-
500
-
0420
-
00
1
*POE power supply must be ordered separately.
For accessories, visit
