Cisco RF Gateway 1 Modules, Configuration Manual

Page: 82 / 286

Chapter 3 General Configuration and Monitoring
58 78-4025112-01 Rev H0
Output Monitoring
The Output Monitoring page provides information related to how transport streams
on the input are bound to QAM resources on the output. The
Details button under
the Input parameter provides additional information on the input stream associated
with a particular output session. See the following screen.
Parameters
The following table describes the Output parameters.
Parameter Description
Session ID The ID of the output session.
Type Refers to Session Type (SPTS, MPTS, Plant or Data).
RFGW QAM Channel Output QAM channel for a particular session ID.
SRM QAM Channel The channel identification for the SRM.
Output Bitrate Output bitrate of a session.
Status Describes session status.

Unbound: The session is not active.

Bound: The session is active and bound to QAM resources on the
output.

Bad input: The input stream associated with this stream is invalid.
GbE Port The GbE port of the input stream associated with an output session.
Destination IP Address Destination IP address of the stream. For multicast streams, it is the
multicast address.
UDP Port UDP port of the input stream associated with a session.
Output Refers to output program number, PMT PID, and PCR PID for a session.
Input Provides details on the input stream associated with an output session.