Cisco RF Gateway 1 Modules, Configuration Manual

Page: 92 / 286

Chapter 3 General Configuration and Monitoring
68 78-4025112-01 Rev H0
Name Description
ECMG Active Proxy
Removed Active ECMG proxy removed
ECMG Channel
Error Received channel error for SuperCAS ID
GbE Port Switch Redundant input port failover.
Download SSL Security documents injected.
Download SSH Security documents injected.
Stream Source
Switch Multicast SSM source switch.
NCS CAM Change A new non-configured stream enters the RFGW-1.
Stream Status
Change When a multicast stream becomes Active/when the state changes from
Active to Input Loss/when the user forces revert multicast stream to
primary port.
CA Blob Length
Error More than 4CA blobs in a create session request. The extra blobs are
discarded.
Ingress All When a unicast stream is Active on a certain input port and the stream
is detected on other port(s) duplicate stream detected.
User Notification of Alarms and Events
The system provides notifications of Alarms and Events in a variety of ways. These
include Front Panel Alarm Indication, Alarm Table (web interface), SNMP Traps and
Log Entries.
Front Panel Alarm Indication
A fault LED on the front panel is provided to allow quick and easy notification of an
alarm existing on the system. When one or more alarms are active, the LED is solid
red. When no alarms are active, the LED is off. The fault LED blinks during system
boot but stabilizes to indicate alarm status after the system has initialized.
Alarm Table
The alarm table is another indicator of alarm status. The table is accessible through
the web interface and provides detailed information regarding alarm status. A
condensed version of the alarm status is also available on the Summary page of the
web interface. The alarm table is shown below.