Configuring Call Handling
How to Configure Cisco Unified SCCP SRST
153
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
–
Tcl IVR 2.0
–
H.450 Tcl script (app-h450-transfer.tcl)
Note
You can continue to use the app-h450-transfer.2.0.0.1.tcl script if you install Cisco IOS
Release 12.2(11)YT1 or later, but you cannot use the app-h450-transfer.2.0.0.2.tcl script with a release
of Cisco IOS software that is earlier than Cisco IOS Release 12.2(11)YT1.
Restrictions
•
When a consultative transfer is made by an analog FXS phone using hookflash, the consultation call
itself cannot be further transferred (that is, it cannot become a recursive or chained transfer) until
after the initial transfer operation is completed and the transferee and transfer-to parties are
connected. After the initial call transfer operation is completed and the transferee and transfer-to
parties are now the only parties in the call, the transfer-to party may further transfer the call.
•
Call transfer with consultation is not supported for Cisco ATA-186, Cisco ATA-188, and Cisco IP
Conference Station 7935. Transfer attempts from these devices are executed as blind transfers.
SUMMARY STEPS
1.
call application voice
application-name location
2.
call application voice
application-name
language
number language
3.
call application voice
application-name
set-location
language category location
4.
call application voice
application-name
delay-time
seconds
5.
dial-peer voice
number
pots
6.
application
application-name
7.
exit
8.
dial-peer voice
number
voip
9.
application
application-name
10.
exit
