Cisco CP-7911G-CH1, System Administrator Manual, Page: 170 / 322

Configuring Call Handling
How to Configure Cisco Unified SIP SRST
170
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
Step 5
after-hours day day start-time stop-time
Example:
Router(config-cm-fallback)# after-hours day mon
19:00 07:00
Defines a recurring time period based on the day of the
week during which calls are blocked to outgoing dial
patterns that are defined using the
after-hours block
pattern command.
•
day : Day of the week abbreviation. The following are
valid day abbreviations: sun , mon , tue , wed , thu , fri ,
sat .
• start-time stop-time : Beginning and ending times for
call blocking, in an HH:MM format using a 24-hour
clock. If the stop time is a smaller value than the start
time, the stop time occurs on the day following the start
time. For example, “mon 19:00 07:00” means “from
Monday at 7 p.m. until Tuesday at 7 a.m.”
The value 24:00 is not valid. If 00:00 is entered as a
stop time, it is changed to 23:59. If 00:00 is entered for
both start time and stop time, calls are blocked for the
entire 24-hour period on the specified date.
Step 6
after-hours date month date start-time
stop-time
Example:
Router(config-cm-fallback)# after-hours date
jan 1 00:00 00:00
Defines a recurring time period based on month and date
during which calls are blocked to outgoing dial patterns that
are defined using the
after-hours block pattern command.
• month : Month abbreviation. The following are valid
month abbreviations: jan , feb , mar , apr , may , jun , jul ,
aug , sep , oct , nov , dec .
•
date : Date of the month. Range is from 1 to 31.
• start-time stop-time : Beginning and ending times for
call blocking, in an HH:MM format using a 24-hour
clock. The stop time must be larger than the start time.
The value 24:00 is not valid. If 00:00 is entered as a
stop time, it is changed to 23:59. If 00:00 is entered for
both start time and stop time, calls are blocked for the
entire 24-hour period on the specified date.
Step 7
exit
Example:
Router(config-cm-fallback)# exit
Exits call-manager-fallback configuration mode.
Step 8
voice register pool tag
Example:
Router(config)# voice register pool 12
Enters voice register pool configuration mode.
•
Use this command to control which registrations are
accepted or rejected by a Cisco Unified SIP SRST
device.
Command or Action Purpose