Setting Up Cisco Unified IP Phones using SCCP
How to Set Up Cisco Unified IP Phones
100
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
Examples
In the following example, octo-line mode is enabled, there are 8 octo-line directory numbers, there are
a maximum of 23 directory numbers, and a maximum of 6 channels are available for incoming calls:
!
call-manager-fallback
max-dn 23 octo-line 8
huntstop channel 6
Configuring the Maximum Number of Calls
To configure the maximum number of calls on a Cisco Unified SCCP IP phone in Cisco Unified SRST
9.0, perform the following steps.
Prerequisites
•
Cisco Unified SRST 9.0 and later versions.
•
Correct firmware, 9.2(1) or a later version, is installed.
SUMMARY STEPS
1.
enable
2.
configure
terminal
3.
call-manager-fallback
4.
max-dn
max-no-of-directories
[
dual-line
|
octo-line
]
5.
timeouts busy
seconds
6.
end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enables Cisco Unified SRST support and enters
call-manager-fallback configuration mode.
