Appendix B: Integrating Cisco Unified Communications Manager and Cisco Unified SRST to Use Cisco Unified SRST
How to Use Cisco Unified SRST Gateways as a Multicast MOH Resource
299
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
Step 9
ip source-address
ip-address
[
port
port
]
Example:
Router(config-cm-fallback)# ip source-address
172.21.51.143 port 2000
(Optional if the
route
keyword is not used in the
multicast moh
command. See Step 13.) Enables a
router to receive messages from Cisco Unified IP
phones through the specified IP addresses and
ports.
•
ip-address
—The pre-existing router IP
address, typically one of the addresses of the
Ethernet port of the router.
•
port
port
—(Optional) The port to which the
gateway router connects to receive messages
from the Cisco Unified IP phones. The port
number range is from 2000 to 9999. The
default port number is 2000.
Step 10
max-ephones
max-phones
Example:
Router(config-cm-fallback)# max-ephones 1
Configures the maximum number of
Cisco Unified IP phones that can be supported by
a router.
•
max-phones
—Maximum number of Cisco IP
phones supported by the router. The
maximum number is platform-dependent. The
default is 0.
Step 11
max-dn
max-directory-number
Example:
Router(config-cm-fallback)# max-dn 1
Sets the maximum possible number of virtual
voice ports that can be supported by a router.
•
max-directory-number
—Maximum number
of directory numbers or virtual voice ports
supported by the router. The maximum
possible number is platform-dependent. The
default is 0.
Step 12
moh
filename
Example:
Router(config-cm-fallback)# moh music-on-hold.au
Enables use of an MOH file.
•
filename
—Filename of the music file. The
music file must reside in flash memory.
Step 13
multicasting-enabled
Selects the multicast-enabled MOH audio source
in the User Hold MOH Audio Source field on the
Phone Configuration page in Cisco Unified CM
Administration GUI.
Command or Action
Purpose