Setting Up Cisco Unified IP Phones using SCCP
How to Set Up Cisco Unified IP Phones
97
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
DETAILED STEPS
Examples
The following example sets the maximum number of DNs or virtual voice ports that can be supported
by a router to 10 and activates the dual-line mode for all IP phones in Cisco Unified CM fallback mode:
call-manager-fallback
max-dn 10 dual-line
exit
Command or Action
Purpose
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.
Step 2
max-dn
max-directory-numbers
[
dual-line
]
[
preference
preference-order
]
Example:
Router(config-cm-fallback)# max-dn 15 dual-line
preference 1
Sets the maximum number of directory numbers (DNs) or
virtual voice ports that can be supported by the router and
activates dual-line mode.
•
max-directory-numbers:
Maximum number of
directory numbers (dns) or virtual voice ports
supported by the router. The maximum number is
platform-dependent. The default is 0. See
Compatibility Information
for further details.
•
dual-line
(Optional). Allows IP phones in
Cisco Unified Communications Manager fallback
mode to have a virtual voice port with two channels.
•
preference
preference-order
(Optional). Sets the
global preference for creating the VoIP dial peers for all
directory numbers that are associated with the primary
number. Range is from 0 to 10. Default is 0, which is
the highest preference.
The
alias
command also has a
preference
keyword that
sets
alias
command preference values. Setting the
alias
command
preference
keyword allows the default
preference set with the
max-dn
command to be
overridden. See the
“Configuring Call Rerouting”
section on page 129
for more information on using the
max-dn
command with the
alias
command.
Step 3
exit
Example:
Router(config-cm-fallback)# exit
Exits call-manager-fallback configuration mode.
