manualshive.com logo in svg

Cisco CP-7911G-CH1, System Administrator Manual

The Cisco CP-7911G-CH1 is a cutting-edge phone designed for efficient and reliable communication. To ensure seamless configuration and management, download the free System Administrator Manual from manualshive.com, providing detailed instructions on setup, customization, and troubleshooting. Enhance your productivity with this exceptional product and its comprehensive user manual.

Share
Download
background image

      Cisco Unified Survivable Remote Site Telephony Feature Roadmap

Documentation Organization

32

Cisco Unified SCCP and SIP SRST System Administrator Guide

OL-13143-04

Documentation Organization

This document consists of the following chapters or appendixes as shown in 

Table 1

.

Table 1

Cisco Unified SRST Configuration Sequence 

Chapter or Appendix

Description

Cisco Unified SCCP and SIP SRST 
Feature Overview, page 11

Gives a brief description of Cisco Unified SRST and provides information on the 
supported platforms and Cisco Unified IP Phones. In addition, it describes any 
prerequisites or restrictions that should be addressed before Cisco Unified SIP SRST 
is configured.

Setting Up the Network, page 63

Describes how to set up a Cisco Unified SRST system to communicate with your 
network.

Cisco Unified SIP SRST 4.1, 
page 75

Describes the features for Cisco Unified SIP SRST Version 4.1 and provides the 
associated configuration procedures.

Setting Up Cisco Unified IP Phones 
using SCCP, page 85

Describes how to set up the basic Cisco Unified SRST phone configuration. 

Setting Up Cisco Unified IP Phones 
using SIP, page 105

Describes features available in Version 3.0 that are also necessary for Version 3.4. 
Features include instructions on how to provide a backup to an external SIP proxy 
server by providing basic registrar services. These services are used by a SIP IP phone 
in the event of a WAN connection outage when the SIP phone is unable to communicate 
with its primary SIP proxy.

Configuring Call Handling, 
page 123

Describes how to configure incoming and outgoing calls. 

Configuring Secure SRST for SCCP 
and SIP, page 177

Describes the Secure SRST security functionality to the Cisco Unified SRST.

Integrating Voice Mail with Cisco 
Unified SRST, page 235

Describes how to set up voice mail.

Setting Video Parameters, page 257

Describes how to set up video parameters. 

Monitoring and Maintaining Cisco 
Unified SRST, page 271

Provides a list of useful show commands for monitoring and maintaining Cisco Unified 
SRST.

Appendix A: Configuring Cisco 
Unified SIP SRST Features Using 
Redirect Mode, page 273

Describes features using redirect mode, which applies to version 3.0 only.

Appendix B: Integrating Cisco 
Unified Communications Manager 
and Cisco Unified SRST to Use 
Cisco Unified SRST as a Multicast 
MOH Resource, page 281

Describes how to configure Cisco Unified CM and Cisco Unified SRST to enable 
multicast music-on-hold (MOH).

Summary of Contents for CP-7911G-CH1



































































































































































































































































































































Reviews:

No comments

Related manuals for CP-7911G-CH1

Jabra TOUR Datasheet preview
TOUR
Brand: Jabra Pages: 2
Yealink T21 Quick Reference Manual preview
T21
Brand: Yealink Pages: 2
Icom IC-125 Maintenance Manual preview
IC-125
Brand: Icom Pages: 75
Jabra GN1000 Quick Setup Manual preview
GN1000
Brand: Jabra Pages: 7
Aiwa AMD-805 Instruction Manual preview
AMD-805
Brand: Aiwa Pages: 20
T-Mobile SDA II Quick Start Manual preview
SDA II
Brand: T-Mobile Pages: 16
Aastra IntelliGate A150 User Manual preview
IntelliGate A150
Brand: Aastra Pages: 85
Marmitek iParty User Manual preview
iParty
Brand: Marmitek Pages: 27
Vortex SkyBell User Manual preview
SkyBell
Brand: Vortex Pages: 19
Tablee T0918 User Manual preview
T0918
Brand: Tablee Pages: 4
Mueller Hydro-Guard HG-4 Operating Instructions Manual preview
Hydro-Guard HG-4
Brand: Mueller Pages: 8
Samsung 22004 User Manual preview
22004
Brand: Samsung Pages: 142
Uniden XCI-660 Instruction Manual preview
XCI-660
Brand: Uniden Pages: 52
Uniden DECT1725 Series Owner'S Manual preview
DECT1725 Series
Brand: Uniden Pages: 44
Northland V-TECH VSP600 Manual preview
V-TECH VSP600
Brand: Northland Pages: 7
Nady Systems IRW-220X HT/LT/O - Nady Ir Wireless System Owner'S Manual preview
IRW-220X HT/LT/O - Nady Ir Wireless System
Brand: Nady Systems Pages: 6
VTech FS2615-2A User Manual preview
FS2615-2A
Brand: VTech Pages: 51
Topcom CHEOPS ONE User Manual preview
CHEOPS ONE
Brand: Topcom Pages: 20

Brands by name

Popular brands

Load more brands