Configuring Call Handling
How to Configure Cisco Unified SCCP SRST
136
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
Configuring Transfer Digit Collection Method
By default, transfer digits are collected from the new call leg. To change the transfer digit collection
method, perform the following steps.
Prerequisites for Cisco Unified SRST 4.3
•
Cisco Unified SRST 4.3
•
Cisco Unified CM 6.0
•
Cisco IOS Release 12.4(15)XZ
Restrictions for Cisco Unified SRST 4.3
•
The Cisco 3200 Series Mobile Access Router does not support SRST.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
call-manager-fallback
4.
transfer-digit-collect
{
new-call
|
orig-call
}
5.
end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.
Step 4
transfer-digit-collect
{
new-call
|
orig-call
}
Example:
Router(config-cm-fallback)#
transfer-digit-collect orig-call
Selects the digit-collection method used for consultative
call transfers.
•
new-call
: Digits are collected from the new call leg.
•
orig-call
: Digits are collected from the original
call-leg. This was the default behavior in versions
before Cisco Unified SRST 4.3.
