Configuring Call Handling
How to Configure Cisco Unified SCCP SRST
160
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
DETAILED STEPS
Examples
The following example shows how to set a dial-peer COR parameter for outgoing calls to the
Cisco Unified IP Phone dial peers and directory numbers created during fallback:
call-manager-fallback
cor outgoing LockforPhoneC 1 5010 - 5020
The following example shows how to set the dial-peer COR parameter for incoming calls to the Cisco IP
phone dial peers and directory numbers in the default COR list:
call-manager-fallback
cor incoming LockforPhoneC default
The following example shows how sub- and super-COR sets are created. First, a custom dial-peer COR
is created with names declared under it:
dial-peer cor custom
name 911
name 1800
name 1900
name local_call
Command or Action
Purpose
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.
Step 2
cor
{
incoming
|
outgoing
}
cor-list-name
[
cor-list-number
starting-number
-
ending-number
|
default
]
Example:
Router(config-cm-fallback)# cor outgoing
LockforPhoneC 1 5010 – 5020
Configures a COR on dial peers associated with directory
numbers.
•
incoming
: COR list to be used by incoming dial peers.
•
outgoing
: COR list to be used by outgoing dial peers.
•
cor-list-name
: COR list name.
•
cor-list-number
: COR list identifier. The maximum
number of COR lists that can be created is 20,
comprised of incoming or outgoing dial peers. The
first six COR lists are applied to a range of directory
numbers. The directory numbers that do not have a
COR configuration are assigned to the default COR
list.
•
starting-number
-
ending-number:
Directory number
range; for example, 2000–2025.
•
default
: Instructs the router to use an existing default
COR list.
Step 3
exit
Example:
Router(config-cm-fallback)# exit
Exits call-manager-fallback configuration mode.
