Cisco Unified Survivable Remote Site Telephony Feature Roadmap
Information About New Features in Cisco Unified SRST
56
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
European Date Formats
The date format on Cisco IP phone displays can be configured with the following two additional formats:
•
yy-mm-dd (year-month-day)
•
yy-dd-mm (year-day-month)
For configuration information, see the
“Configuring IP Phone Clock, Date, and Time Formats” section
on page 90
.
Huntstop for Dual-Line Mode
A new keyword was added to the
huntstop
command. The
channel
keyword causes hunting to skip the
secondary channel in dual-line configuration if the primary line is busy or does not answer.
For configuration information, see the
“Configuring Dial-Peer and Channel Hunting” section on
page 144
.
Music-on-Hold for Multicast from Flash Files
Cisco SRST can be configured to support continuous multicast output of MOH from a flash MOH file
in flash memory.
For more information, see the
“Defining XML API Schema” section on page 176
.
Ringing Timeout Default
A ringing timeout default can be configured for extensions on which no-answer call forwarding has not
been enabled. Expiration of the timeout causes incoming calls to return a disconnect code to the caller.
This mechanism provides protection against hung calls for inbound calls received over interfaces such
as Foreign Exchange Office (FXO) that do not have forward-disconnect supervision. For more
information, see the
“Configuring the Ringing Timeout Default” section on page 146
.
Secondary Dial Tone
A secondary dial tone is available for Cisco Unified IP Phones running Cisco SRST. The secondary dial
tone is generated when a user dials a predefined PSTN access prefix. An example would be the different
dial tone heard when a designated number is pressed to reach an outside line.
The secondary dial tone is created through the secondary dialtone command. For more information, see
the
“Configuring a Secondary Dial Tone” section on page 95
.
Enhancement to the show ephone Command
The
show ephone
command is enhanced to display the following:
•
Configuration and status of additional phones (new keywords:
7905
,
7914
,
7935
,
ATA
)
•
Status of all phones with the call-forwarding all (CFA) feature enabled on at least one of their DNs
(new keyword:
cfa
)
For more information, see the
show ephone
command in
Cisco Unified SRST and Cisco Unified SIP
SRST Command Reference (All Versions)
.
