manualshive.com logo in svg

Cisco CP-7911G-CH1, System Administrator Manual, Page: 29 / 322

Share
Download
Cisco CP-7911G-CH1 System Administrator Manual Download Page 29

 

      Cisco Unified SCCP and SIP SRST Feature Overview

Obtaining Documentation, Obtaining Support, and Security Guidelines

29

Cisco Unified SCCP and SIP SRST System Administrator Guide

OL-13143-04

Standards

MIBs

RFCs

Technical Assistance

Obtaining Documentation, Obtaining Support, and Security 
Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, 
security guidelines, and also recommended aliases and general Cisco documents, see the monthly 

What’s New in Cisco Product Documentation

, which also lists all new and revised Cisco technical 

documentation, at

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.

Standard

Title

ITU X. 509 Version 3

Public-Key and Attribute Certificate Frameworks 

MIB

MIBs Link

No new or modified MIBs are supported by this 
feature, and support for existing MIBs has not been 
modified by this feature.

To locate and download MIBs for selected platforms, Cisco IOS 
releases, and feature sets, use Cisco MIB Locator found at the 
following URL:

http://www.cisco.com/go/mibs

 

RFC

Title

RFC 2246

The Transport Layer Security (TLS) Protocol Version 1.0

RFC 2543

SIP: Session Initiation Protocol 

RFC 3261

SIP: Session Initiation Protocol

 

RFC 3711

The Secure Real-Time Transport Protocol (SRTP)

Description

Link

The Cisco Technical Support & Documentation 
website contains thousands of pages of searchable 
technical content, including links to products, 
technologies, solutions, technical tips, and tools. 
Registered Cisco.com users can log in from this page to 
access even more content.

http://www.cisco.com/techsupport 

Summary of Contents for CP-7911G-CH1



































































































































































































































































































































Reviews:

No comments