Setting Up Cisco Unified IP Phones using SCCP
How to Set Up Cisco Unified IP Phones
101
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
Step 4
max-dn
max-no-of-directories
[
dual-line
|
octo-line
]
Example:
Router(config-cm-fallback)# max-dn 10 octo-line
Sets the maximum possible number of directory numbers or
virtual voice ports that can be supported by a router and
enables dual-line mode, octo-line mode, or both modes.
•
max-no-of-directories
—Maximum number of directory
numbers or virtual voice ports supported by the router.
The maximum possible number is platform-dependent.
The default is 0 directory numbers and 1 channel per
virtual port.
•
dual-line
—(Optional) Sets all Cisco Unified IP phones
connected to a Cisco Unified SRST router to one virtual
voice port with two channels.
•
octo-line
—(Optional) Sets all Cisco Unified IP phones
connected to a Cisco Unified SRST router to one virtual
voice port with eight channels.
Step 5
timeouts busy
seconds
Example:
Router(config-cm-fallback)# timeouts busy 10
Sets the timeout value for call transfers to busy destinations.
•
seconds
—Number of seconds after connection to a
busy destination before a transferred call is
disconnected. Range is 0 to 30. Default: 10.
Step 6
end
Example:
Router(config-cm-fallback)# end
Exits configuration mode and enters privileged EXEC
mode.
Command or Action
Purpose
