Setting Up Cisco Unified IP Phones using SIP
How to Configure the SIP Registrar
114
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
Step 6
cor
{
incoming
|
outgoing
}
cor-list-name
{cor-list-number starting-number
[
-
ending-number
] |
default
}
Example:
Router(config-register-pool)# cor incoming
call91 1 91011
Configures a class of restriction (COR) on the VoIP dial
peers associated with directory numbers. COR specifies
which incoming dial peers can use which outgoing dial
peers to make a call. Each dial peer can be provisioned with
an incoming and outgoing COR list. The keywords and
arguments are defined as follows:
•
incoming
: COR list to be used by incoming dial peers.
•
outgoing
: COR list to be used by outgoing dial peers.
•
cor-list-name
: COR list name.
•
cor-list-number
: COR list identifier. The maximum
number of COR lists that can be created is four,
comprised of incoming or outgoing dial peers.
•
starting-n
umber: Start of a directory number range, if
an ending number is included. Can also be a standalone
number.
•
(Optional) Indicator that a full range is configured.
•
ending-number
: (Optional) End of a directory number
range.
•
default
: Instructs the router to use an existing default
COR list.
Step 7
incoming called-number
[
number
]
Example:
Router(config-register-pool)# incoming
called-number 308
Applies incoming called parameters to dynamically created
dial peers. The
number
argument is optional and indicates a
sequence of digits that represent a phone number prefix.
Step 8
number
tag number-pattern
{
preference
value
}
[
huntstop
]
Example:
Router(config-register-pool)# number 1 50..
preference 2
Indicates the E.164 phone numbers that the registrar permits
to handle the Register message from the Cisco Unified SIP
IP Phone. The keywords and arguments are defined as
follows:
•
tag
: Number from 1 to 10 and the distinguishing factor
when there are multiple
number
commands.
•
number-pattern
: Phone numbers (including wildcards
and patterns) that are permitted by the registrar to
handle the Register message from the SIP IP phone.
•
preference
value
: (Optional) Defines the number list
preference order.
•
huntstop
: (Optional) Stops hunting if the dial peer is
busy.
Command or Action
Purpose
