manualshive.com logo in svg

Cisco 5505 - ASA Firewall Edition Bundle, Cli Configuration Manual

The Cisco 5505 - ASA Firewall Edition Bundle is a robust network security appliance designed to protect your data and ensure secure connectivity. To get started quickly and easily, download the free "Getting Started Manual" from our manualshive.com, offering step-by-step instructions for seamless installation and configuration.

Share
Download
background image

 

1-10

Cisco ASA Series CLI Configuration Guide

 

Chapter 1      Starting Interface Configuration (ASA 5510 and Higher)

  Guidelines and Limitations

Guidelines and Limitations

This section includes the guidelines and limitations for this feature.

Context Mode Guidelines

In multiple context mode, configure the physical interfaces in the system execution space according to 
the 

“Starting Interface Configuration (ASA 5510 and Higher)” section on page 1-13

. Then, configure the 

logical interface parameters in the context execution space according to 

Chapter 1, “Completing 

Interface Configuration (Routed Mode),”

 or 

Chapter 1, “Completing Interface Configuration 

(Transparent Mode).”

Firewall Mode Guidelines

•

For transparent mode, you can configure up to eight bridge groups per context or for a single mode 
device.

•

Each bridge group can include up to four interfaces.

•

For multiple context, transparent mode, each context must use different interfaces; you cannot share 
an interface across contexts.

Failover Guidelines

•

When you use a redundant or EtherChannel interface as a failover link, it must be pre-configured on 
both units in the failover pair; you cannot configure it on the primary unit and expect it to replicate 
to the secondary unit because 

the failover link itself is required for replication

.

•

If you use a redundant or EtherChannel interface for the state link, no special configuration is 
required; the configuration can replicate from the primary unit as normal.

•

You can monitor redundant or EtherChannel interfaces for failover using the 

monitor-interface

 

command; be sure to reference the logical redundant interface name. When an active member 
interface fails over to a standby interface, this activity does not cause the redundant or EtherChannel 
interface to appear to be failed when being monitored for device-level failover. Only when all 
physical interfaces fail does the redundant or EtherChannel interface appear to be failed (for an 
EtherChannel interface, the number of member interfaces allowed to fail is configurable).

•

If you use an EtherChannel interface for a failover or state link, then to prevent out-of-order packets, 
only one interface in the EtherChannel is used. If that interface fails, then the next interface in the 
EtherChannel is used. You cannot alter the EtherChannel configuration while it is in use as a failover 
link. To alter the configuration, you need to either shut down the EtherChannel while you make 
changes, or temporarily disable failover; either action prevents failover from occurring for the 
duration.

•

Although you can configure the failover and failover state links on a port channel link, this port 
channel cannot be shared with other firewall traffic.

2.

The maximum number of combined interfaces; for example, VLANs, physical, redundant, bridge group, and EtherChannel interfaces. Every 

interface

 

command defined in the configuration counts against this limit. For example, both of the following interfaces count even if the GigabitEthernet 0/0 
interface is defined as part of port-channel 1:

interface gigabitethernet 0/0

and

interface port-channel 1

Summary of Contents for 5505 - ASA Firewall Edition Bundle





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 5505 - ASA Firewall Edition Bundle

IBM 3455-D3E Install Manual preview
3455-D3E
Brand: IBM Pages: 46
Advantech HPC-7483 User Manual preview
HPC-7483
Brand: Advantech Pages: 42
IEI Technology PAC-1700G Quick Installation Manual preview
PAC-1700G
Brand: IEI Technology Pages: 9
IEI Technology EBC-3000 Quick Installation Manual preview
EBC-3000
Brand: IEI Technology Pages: 7
Norco RPC-600 User Manual preview
RPC-600
Brand: Norco Pages: 31
Blonder tongue AMM-806 Reference Manual preview
AMM-806
Brand: Blonder tongue Pages: 285
Fortinet FortiGate FortiGate-5050 Quick Start Manual preview
FortiGate FortiGate-5050
Brand: Fortinet Pages: 2

Brands by name

Popular brands

Load more brands