![background image](http://html.mh-extra.com/html/cisco/5505-asa-firewall-edition-bundle/5505-asa-firewall-edition-bundle_cli-configuration-manual_186242017.webp)
1-15
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring SNMP
Information About SNMP
SNMP Version 3
This section describes SNMP Version 3 and includes the following topics:
•
SNMP Version 3 Overview, page 1-15
•
•
•
•
•
SNMP Version 3 Overview
SNMP Version 3 provides security enhancements that are not available in SNMP Version 1 or SNMP
Version 2c. SNMP Versions 1 and 2c transmit data between the SNMP server and SNMP agent in clear
text. SNMP Version 3 adds authentication and privacy options to secure protocol operations. In addition,
this version controls access to the SNMP agent and MIB objects through the User-based Security Model
mteTriggerFired
(DISMAN-EVENT-MIB)
mteHotTrigger, mteHotTargetName,
mteHotContextName, mteHotOID,
mteHotValue, cempMemPoolName,
cempMemPoolHCUsed
The
snmp-server enable traps
memory-threshold
command is used to
enable the memory threshold notification.
The mteHotOID is set to
cempMemPoolHCUsed. The
cempMemPoolName and
cempMemPoolHCUsed objects are sent
with the other objects.
mteTriggerFired
(DISMAN-EVENT-MIB)
Note
Not supported on the
ASA Services Module.
mteHotTrigger, mteHotTargetName,
mteHotContextName, mteHotOID,
mteHotValue, ifHCInOctets,
ifHCOutOctets, ifHighSpeed,
entPhysicalName
The
snmp-server enable traps
interface-threshold
command is used to
enable the interface threshold
notification. The entPhysicalName
objects are sent with the other objects.
natPacketDiscard
(NAT-MIB)
ifIndex
The
snmp-server enable traps nat
packet-discard
command is used to
enable the NAT packet discard
notification. This notification is rate
limited for 5 minutes and is generated
when IP packets are discarded by NAT
because mapping space is not available.
The ifIndex gives the ID of the mapped
interface.
warmStart
(SNMPv2-MIB)
—
The
snmp-server enable traps snmp
warmstart
command is used to enable
and disable transmission of these traps.
Table 1-5
Supported Traps (Notifications) (continued)
Summary of Contents for 5505 - ASA Firewall Edition Bundle
