1-25
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring a Cluster of ASAs
Guidelines and Limitations
•
On the switch, we recommend that you use one of the following EtherChannel load-balancing
algorithms:
source-dest-ip
or
source-dest-ip-port
(see the Nexus OS and IOS
port-channel
load-balance
command). Do not use a
vlan
keyword in the load-balance algorithm because it can
cause unevenly distributed traffic to the ASAs in a cluster.
Do not
change the load-balancing
algorithm from the default on the ASA (in the
port-channel load-balance
command).
•
If you change the load-balancing algorithm of the EtherChannel on the switch, the EtherChannel
interface on the switch temporarily stops forwarding traffic, and the Spanning Tree Protocol restarts.
There will be a delay before traffic starts flowing again.
EtherChannel Guidelines
•
For detailed EtherChannel guidelines, limitations, and prerequisites, see the
EtherChannel” section on page 1-28
•
See also the
“EtherChannel Guidelines” section on page 1-11
•
Spanned vs. Device-Local EtherChannel Configuration—Be sure to configure the switch
appropriately for Spanned EtherChannels vs. Device-local EtherChannels.
–
Spanned EtherChannels—For ASA
Spanned
EtherChannels, which span across all members of
the cluster, the interfaces are combined into a single EtherChannel on the switch. Make sure
each interface is in the same channel group on the switch.
VLAN 101
port-ch1
RIGHT
WRONG
port-ch2
port-ch3
port-ch4
ASA1
Switch
Switch
ASA2
ASA3
ASA4
ten0/6
VLAN 101
port-ch1
Spanned Data Ifc
port-ch1
ten0/6
ten0/6
ten0/6
ASA1
ASA2
ASA3
ASA4
ten0/6
Spanned Data Ifc
port-ch1
ten0/6
ten0/6
ten0/6
334621
Summary of Contents for 5505 - ASA Firewall Edition Bundle
