Cisco 5505 - ASA Firewall Edition Bundle, Cli Configuration Manual

Page: 1984 / 2164

1-18
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Logging
Configuring Logging
Including the Date and Time in Syslog Messages
To include the date and time in syslog messages, enter the following command:
Disabling a Syslog Message
To disable a specified syslog message, enter the following command:
Changing the Severity Level of a Syslog Message
To change the severity level of a syslog message, enter the following command:
Command Purpose
logging timestamp
hostname(config)# logging timestamp
Example:
hostname(config)# logging timestamp
LOG-2008-10-24-081856.TXT
Specifies that syslog messages should include the date and
time that they were generated. To remove the date and time
from syslog messages, enter the
no logging timestamp
command.
Command Purpose
no logging message message_number
Example:
hostname(config)# no logging message 113019
Prevents the ASA or ASASM from generating a particular
syslog message. To reenable a disabled syslog message, enter
the
logging message message_number command (for
example, logging message 113019 ). To reenable logging of all
disabled syslog messages, enter the clear config logging
disabled command.
Command Purpose
logging message message_ID level severity_level
Example:
hostname(config)# logging message 113019 level 5
Specifies the severity level of a syslog message. To reset the
severity level of a syslog message to its setting, enter the
no
logging message message_ID level current_severity_level
command (for example, no logging message 113019 level 5 ).
To reset the severity level of all modified syslog messages to
their settings, enter the
clear configure logging level
command.