manualshive.com logo in svg

Cisco 5505 - ASA Firewall Edition Bundle, Cli Configuration Manual

The Cisco 5505 - ASA Firewall Edition Bundle is a robust network security appliance designed to protect your data and ensure secure connectivity. To get started quickly and easily, download the free "Getting Started Manual" from our manualshive.com, offering step-by-step instructions for seamless installation and configuration.

Share
Download
background image

 

1-20

Cisco ASA Series CLI Configuration Guide

 

Chapter 1      Managing Feature Licenses

  Supported Feature Licenses Per Model

Intercompany Media 
Engine

When you enable the Intercompany Media Engine (IME) license, you can use TLS proxy sessions 
up to the configured TLS proxy limit. If you also have a Unified Communications (UC) license 
installed that is higher than the default TLS proxy limit, then the ASA sets the limit to be the UC 
license limit plus an additional number of sessions depending on your model. You can manually 
configure the TLS proxy limit using the 

tls-proxy maximum-sessions

 command or in ASDM, 

using the 

Configuration > Firewall > Unified Communications > TLS Proxy

 pane. To view the 

limits of your model, enter the 

tls-proxy maximum-sessions ?

 command. If you also install the 

UC license, then the TLS proxy sessions available for UC are also available for IME sessions. For 
example, if the configured limit is 1000 TLS proxy sessions, and you purchase a 750-session UC 
license, then the first 250 IME sessions do not affect the sessions available for UC. If you need 
more than 250 sessions for IME, then the remaining 750 sessions of the platform limit are used 
on a first-come, first-served basis by UC and IME.

•

For a license part number ending in “K8”, TLS proxy sessions are limited to 1000.

•

For a license part number ending in “K9”, the TLS proxy limit depends on your configuration 
and the platform model.

Note

K8 and K9 refer to whether the license is restricted for export: K8 is unrestricted, and K9 
is restricted.

You might also use SRTP encryption sessions for your connections:

•

For a K8 license, SRTP sessions are limited to 250.

•

For a K9 license, there is no limit.

Note

Only calls that require encryption/decryption for media are counted toward the SRTP 
limit; if passthrough is set for the call, even if both legs are SRTP, they do not count toward 
the limit.

Interfaces of all types, 
Max.

The maximum number of combined interfaces; for example, VLANs, physical, redundant, bridge 
group, and EtherChannel interfaces. Every 

interface

 command defined in the configuration 

counts against this limit. For example, both of the following interfaces count even if the 
GigabitEthernet 0/0 interface is defined as part of port-channel 1:

interface gigabitethernet 0/0

and

interface port-channel 1

IPS module

The IPS module license lets you run the IPS software module on the ASA.

You must also purchase a separate IPS signature subscription; for failover, purchase a 
subscription for each unit. To obtain IPS signature support, you must purchase the ASA with IPS 
pre-installed (the part number must include “IPS”).

The combined failover cluster license does not let you pair non-IPS and IPS units. For example, 
if you buy the IPS version of the ASA 5515-X (part number ASA5515-IPS-K9) and try to make 
a failover pair with a non-IPS version (part number ASA5515-K9), then Cisco will not let you 
obtain IPS signature updates for the ASA5515-K9 unit, even though it has an IPS module license 
inherited from the other unit.

Table 1-16

License Notes (continued)

License

Notes

Summary of Contents for 5505 - ASA Firewall Edition Bundle





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 5505 - ASA Firewall Edition Bundle

ADLINK Technology 96864-1 User Manual preview
96864-1
Brand: ADLINK Technology Pages: 64
BELL LABS INNOVATIONS Lucent Technologies Stinger MS+ Getting Started Manual preview
Lucent Technologies Stinger MS+
Brand: BELL LABS INNOVATIONS Pages: 100
National Instruments PXI-1031DC User Manual preview
PXI-1031DC
Brand: National Instruments Pages: 64
Brocade Communications Systems FastIron SX 1600 Configuration Manual preview
FastIron SX 1600
Brand: Brocade Communications Systems Pages: 593
Thermaltake V4 Black VM3000 Series User Manual preview
V4 Black VM3000 Series
Brand: Thermaltake Pages: 14
Thermaltake S500 TG User Manual preview
S500 TG
Brand: Thermaltake Pages: 14
StorCase Technology InfoStation External SCSI Ultra160 User Manual preview
InfoStation External SCSI Ultra160
Brand: StorCase Technology Pages: 61

Brands by name

Popular brands

Load more brands