doseBadge⁵ noise dosimeter - instrument handbook
34
The status of the instrument is shown by the green run, blue pause and red stop buttons.
11.2.3 Using scheduled measurements
If a scheduled pause has been programmed into the instrument, this will be activated at
the appropriate time.
11.2.4 Pause indication
When your doseBadge5 is paused, the blue LED will flash every five seconds.
See page 77 for details of the LED status indicators.
11.3
Mid-shift readings
It can be useful to view the accumulated noise exposure whilst a measurement is in
progress. This is commonly known as a mid-shift reading.
Your doseBadge allows measurements to be viewed whilst in progress using either the
wand or the dBLink App as described below.
11.3.1 Using the wand
Connect to your instrument and select the Read option as shown on the next page:
