doseBadge⁵ noise dosimeter - instrument handbook
15
6
Connecting to your doseBadge
Your doseBadge can be connected to a number of different controllers, which allow
measurements to be started, paused and stopped, and also for your instrument to be
configured.
Your doseBadge can be connected to NoiseTools via USB, Bluetooth® to the RC:120A
wand and via Bluetooth® to the dBLink App.
6.1
Connecting to the NoiseTools software
Connection to the NoiseTools software is through the CU:120A Dock which connects to
a PC via a USB connection. See page 14 for details of configuring the doseBadge5 via
NoiseTools and page 32 for details of downloading data into NoiseTools.
6.2
Connecting to the RC:120A Wand
The connection between the RC:120A Wand and the doseBadge5 is via Bluetooth®.
See page 51 for details of connecting to and using the Wand.
6.3
Connecting to the dBLink App
Connection to the dBLink App is via Bluetooth®. Ensure that the Bluetooth® is enabled
on the mobile device.
See page 61 for details of connecting to and using the dBLink App.
