doseBadge⁵ noise dosimeter - instrument handbook
51
15
The RC:120A wand
The RC:120A doseBadge5 wand is an optional item that allows instruments to be controlled,
measurements started, paused and stopped, and for mid-shift readings to be taken remotely.
The information displayed by the wand when reading measurements from your doseBadge,
is configured on the instrument.
The wand communicates to any number of doseBadge units via Bluetooth® (this requires
that the Bluetooth communications are enabled on your doseBadge instruments).
15.1
Switching on the wand
The wand is switched on by pressing the round key in the centre of the keypad. The wand
will display the Cirrus Research logo and then show the Connect screen:
To switch off the wand, press and hold the round key, and wait
for the countdown to complete. The wand will automatically
power off after two minutes to reduce battery consumption.
15.2
Connecting to your doseBadge(s)
To connect to one or more doseBadge instruments, select the
Connect screen and press the round key. The wand will search for available doseBadge
instruments and will show the following screen:
When one more doseBadge instruments are detected, the wand will show a list of the
available units.
The Refresh option forces the wand to search again for available instruments that are in
range. Select the instrument required and press the round key to continue. The wand will
display the Connecting screen:
