doseBadge⁵ noise dosimeter - instrument handbook
21
7.2.6.1 Time history rate
Throughout a measurement, your doseBadge is logging the noise data at a specified rate.
This information is used in the NoiseTools software to display the graphs of noise vs time.
The sample period for data logging can be selected to be either 1 second or 1 minute, and
this affects all data logging channels.
7.2.6.2 Scheduled measurements
Scheduled measurements are a powerful feature of your doseBadge. It allows measurements
to be started, paused and stopped automatically without the need for user intervention.
Up to three periods can be set during the day allowing for breaks to be accommodated
(where regulations require), and the schedules can be enabled or disabled for different days
of the week.
For more details of setting scheduled measurements, please see page 45.
Please note:
when your doseBadge is attached to a powered dock, the scheduled
measurements will not be activated. Remove the doseBadge5 from the dock to activate
the scheduled measurements.
7.2.6.3 Clear memory
This allows the memory of the selected doseBadge to be
cleared. Ensure that any measurements required have been
downloaded.
Confirmation is required before the memory is cleared. Once the
memory has been cleared, measurements cannot be retrieved.
