doseBadge⁵ noise dosimeter - instrument handbook
37
11.4
Stopping a measurement
11.4.1 Stopping a measurement with NoiseTools
To stop a measurement through NoiseTools, connect your doseBadge to the dock and from
the dock window, press “Stop a Measurement” and the status will change from running, to
stopped.
11.4.2 Stopping a measurement with the wand
When the instrument is measuring, the options are to either pause it or stop it. The small
green recording icon in the status bar indicates that the instrument is measuring.
Pressing the right button will stop the measurement and a confirmation screen will appear
for a few seconds.
11.4.3 Stopping a measurement with dBLink
To stop a measurement with dBLink, connect to the required instrument that is running and
from the instrument discovery window, press the red stop button. Press again to confirm.
The status of the instrument is shown by the Green run, Blue pause and Red Stop
buttons.
