doseBadge⁵ noise dosimeter - instrument handbook
25
7.2.10.4 Transport Mode
Your doseBadge can be set into Transport Mode for shipping and storage. See page 43 for
more information.
7.3
Configuring via the dBLink App
By connecting your doseBadge to dBLink, you can do the following:
• Set the name, place, project or person information for your instrument
- This information is downloaded into NoiseTools along with the measurement
• Set the clock (synchronise the clock in your doseBadge to the one on your mobile
device)
• Clear the instrument’s memory
• Select the integrators
- Up to four independent integrators can be enabled at any time
• Select the SPL Max settings
- Up to four independent SPL Max values can be enabled at any time
• Select the Peak channels
- Up to two independent Peak channels can be enabled at any time
• Enable or disable scheduled measurements
• Add a scheduled measurement
See page 62 for further details of configuring your doseBadge from dBLink.
