Chyron infinit! series, Operation Manual

Page: 859 / 978

iNFiNiT! Family Operation Manual
Revision D 21-17 RGB Tools
NOTE
If storing a character with any level of
Transparency, press M
before adding
character to a font.
If you attempt to save a font to which new characters
have been added, and the save fails due to insufficient
disk space, try deleting characters until it fits.
NOTE
If a Record operation fails and you do
not re-record the font, the font on the
disk will be corrupted.
If you modify a font by adding or deleting characters and
is not recorded to disk, the following warning message
appears when you try to exit from the Font Utility:
Figure 21-9. Font Not Saved to Disk Warning
If you press
Y
, all changes in the font are lost. To save the
font, press RCD . After recording the font (or after exiting
in any other way), you are returned to the RGB Tools
main menu.
When the RGB font is loaded, NA (instead of a sample
character) appears in the
Fonts Loaded
and
Font Info
areas of the Message Compose main menu.
5HFRUGLQJDQ5*%0HVVDJH5
An RGB message can be recorded in two ways:
• If Full Screen is Off , only the RGB image within the
Crop Box is recorded.
• If Full Screen is On , the entire screen is recorded.