Chyron infinit! series, Operation Manual

Page: 603 / 978

iNFiNiT! Family Operation Manual
Revision D 15-7 Advanced Read FX
Figure 15-3. Arrow Field
6SHHG
The duration of time that it takes for an effect to execute
is set in the
Speed: field.
The duration can range from 2 to 300 fields. If a duration
lower than
2
is entered, the
Speed:
field resets to
2.
If a
duration higher than 300 , the Speed: field resets to 300 .
The default setting is
60
.
60 fields = 1 second NTSC or PAL-M
50 fields = 1 second PAL
To set the duration of the transition:
[ ] 1. Place the cursor on the
Speed:
field.
[ ] 2. Press
CLR
, enter the desired duration in fields
using the Address Keypad, then press ; or
click on the appropriate arrow until the desired
duration is displayed.
NOTE
Transition Pattern J executes within a
fixed duration, and only affects the
area within the Safe Title Box. When
a Read Effect using transition pattern
J is completed, the area around the
Safe Title Box instantaneously
displays the remainder of the new
image. Speed cannot be set. J
completes a full screen transition in
approximately 2 seconds. If J is
executed using a smaller Safe Title
area, it completes the transition more
quickly.
Ease: In