Chyron infinit! series, Operation Manual

Page: 616 / 978

CHYRON Corporation
Advanced Read FX 15-20 Revision D
• Set
Fonts:
in the directory defaults to
Y
(§6.6.4).
The necessary fonts automatically load when the
message directory you are using becomes the current
directory.
To execute a Read Effect:
[ ] 1. Set all parameters that apply to the particular
Effect Type and Transition Pattern.
[ ] 2. If necessary, press
DO
to clear the Read Next
buffer (§15.6.3).
[ ] 3. Press CLR , then enter the ID number of the
first message.
[ ] 4. Press
READ NEXT
.
This loads the message into the Read Next
buffer.
XXXX Message read - Read next
buffer ready
appears on the Prompt Line,
where XXXX designates the type of message
(e.g.
Full Page
).
NOTE
You cannot perform READ NEXT
operations using Text & Graphics
messages.
[ ] 5. Press
READ NEXT
.
The first message appears on screen as set up
in Read Effects. Additionally, the following
message is loaded into the Read Next buffer.
[ ] 6. Repeat Steps 2 and 3 however many times it is
necessary to display all of the messages in the
sequence. Press
READ NEXT
twice to stop the
search at the last message in the sequence.