Chyron infinit! series, Operation Manual

Page: 545 / 978

iNFiNiT! Family Operation Manual
Revision D 13-55 Flash Font
7H[WXUH
:LUHIUDPH0RGHO
Entries in the Object area of the 3D Utility window are
reflected immediately in the appearance of the wire-
frame. The
Rotate
function is reflected by the position of
the yellow or green pyramid; effects from other Light
functions (
Specular, Ambient
, and
Intensity
) do not
appear until after conversion.
The effects of adjusting fields in the Object area are
shown in the following diagram (Figure 13-30).
Type:
Message:/Func: [ ] 1. Highlight, then press the
SPACE BAR
to
toggle through NONE , RGB , and FUNC to
define the type of texture file (if any),
which will be used in the conversion.
[ ] 2. Select either
Message
: if the
Type:
field is
set to RGB or NONE ; or Function: if the
Type:
field specifies
FUNC
.
Drive:
Dir:
These two fields specify where the Texture file is
located. It does not have to be stored on the same
device as the current message or font directory.