Chyron infinit! series, Operation Manual

Page: 788 / 978

CHYRON Corporation
Disk Utilities 19-18 Revision D
arrow appears to the left of the file name to
indicate it’s one to copy. Repeat this procedure
for each file in the list you want to copy.
[ ] 2. When finished, press CNTL X or select
Execute
to start the copy process. It doesn’t
matter where in the list you are when the
operation begins - only the selected files are
copied.
To narrow the copy operation further:
• Use the
FILE TYPE:
field to copy only certain types
of files. Enter the field by pressing TAB or SHIFT +
TAB
, then press the
SPACE BAR
to choose a type
( MACHINE , MASTER , MESSAGE , etc.), or, press a
letter key to jump directly to a particular file type
(e.g., "
P " for PROGRAMS, " M " for MACHINE. For
example, to copy only Machine Font files, select
MACHINE.
• Enter Y in the CONFIRM: field for overwrite confir-
mation (for example, replacing an old version of one
file with a newer version). Normally, leave the field
at
Y
. If you're copying many files simultaneously,
you may want to set this to N to save time. If set to N ,
an existing file is overwritten with no confirmation.
• Copy a range of file names by entering the starting
and ending names in the
COPY NAMES: field. For
example, message numbers 10 to 20 would be
entered as
10-20 .
• Enter a file name in the COPY NAMES: field to copy
individual files. To copy all files beginning with the
same number or letter, enter the number or letter fol-
lowed by an asterisk (e.g.
a*
).
To execute the Copy operation:
• Press CNTL X or select Execute .