Chyron infinit! series, Operation Manual

Page: 629 / 978

iNFiNiT! Family Operation Manual
Revision D 15-33 Advanced Read FX
2XWSXW3HUFHQWDJH/HYHOV
The Output Percentage level of the video signal of each
buffer is controlled by a Percent slider. Output Percent-
age level can be set from
0
to
100
inclusive.
•
0
: Output Percentage level of the video signal is
0
.
The image cannot be seen.
• 100 : Output Percentage level of the video signal is
100
. Image appears completely opaque, and covers
any image that is behind it.
• 1 - 99 : Image appears to be very transparent ( 1 ) to
almost completely opaque (
99
). Other images set
behind these images can show through.
Cursor to the slider you want to adjust. There are three
ways to adjust a slider:
• Press
CLR
; enter a value between
0
and
100
, then
press .
• Press SHIFT CHAR +
Ì
or
Í
as many times as
necessary to reach the desired setting.
• Use the mouse to drag the Percent slider to the
desired Output Percentage level.
NOTE
When a Special Roll is executed in an
EEFB, the Background/Foreground
Output Percentage levels for that
buffer are overridden. The
Foreground output is automatically
set 100%; the Background output is
set to 0%.