Chyron infinit! series, Operation Manual

Page: 478 / 978

CHYRON Corporation
Function Keys 12-12 Revision D
To create a loop:
[ ] 1. Place the cursor in the Step column at the step
where you want the loop to start. For this
example, use Step
0
. Press
L
. The following
steps are entered into the list:
Figure 12-3. Loop Function
Step
0
shows
LOOP
, indicating the beginning
of the loop.
Step 1 shows 001 TIMES . This default value
specifies that the commands within the loop
execute only once.
Step 2 shows END LOOP at 000 . This
specifies that the loop ends at Step
2
.
000
specifies the beginning step number of the
loop, to distinguish it from any other loops
which may be in the Function Key list.
[ ] 2. 001 TIMES is highlighted. Enter a value
between
0
and
249
number to specify the
number of times the loop executes.