Chyron infinit! series, Operation Manual

Page: 318 / 978

CHYRON Corporation
Directory Features 8-36 Revision D
The message in the Read Next buffer is
replaces the message that was on the Edit
Monitor, and the following message is loaded
into the Read Next buffer.
[ ] 5. Press
READ NEXT
as many times as need be to
display the sequence of messages.
[ ] 6. Press any other key (or READ NEXT twice) to
stop searching at end of sequence.
5($'1(;7DQG
2XWRI6HTXHQFH0HVVDJHV
When using Read Effects (Section 15), you may want to
execute
READ NEXT
using out-of-sequence messages.
To load, then display an out-of sequence message:
[ ] 1. Press
CLR
, then enter the ID number of the
message that you want loaded into the Read
Next buffer. Press
READ NEXT
.
The message is loaded into the Read Next
buffer.
Read next buffer ready is displayed
on the Prompt Line.
[ ] 2. Press
READ NEXT
. The message assigned the
next ascending ID number is loaded into the
Read Next buffer.
Read next buffer ready
is
displayed on the Prompt Line.
• If you press READ NEXT again at this
point, the message loaded into the Read
Next buffer is displayed.
• If, however, you want to display another
out-of-sequence message, the above proce-
dure must be repeated.
[ ] 3. Repeat this operation as many times as
necessary.