Chyron infinit! series, Operation Manual

Page: 506 / 978

CHYRON Corporation
Flash Font 13-16 Revision D
Figure 13-10. Aspect
To set Aspect :
• Enter the new value in the
Aspect:
field. When
using the Address Keypad to enter a value, do not
enter a decimal point. The system automatically
inserts one. For example, if you want to change the
width to 0.25 of its original size, enter
25
in the
Aspect: field, then press .
NOTE: If 16 X 9 in the Message Compose Setup menu is
activated,
Aspect
is automatically set to
.75
on entry to
the Flash Font main menu. See §3.6.21, §6.8 and §6.9
for information on
16 X 9 .
(GJHV
Edge
Type
,
Size
, and
Direction
can be set for a Flash Font.
Edge Type
There are six
Types
from which to choose:
None
,
Shadow (Drop Shadow), Offset , Border , Combnd 1
and
Combnd 2
. All Edge
Types
except for
None
use the
color set in Edge Color . Edge Size can be set for all
Edge
Types
but
None
. Edge
Direction
can be set for all
Edge Types except None and Border .
• Combnd 1 combines Border and Shadow . The
width of the
Shadow
equals the set
Edge Size
, and
the width of the Border equals 1/2 (rounded down)
the set
Edge Size
.
Original Width
(Aspect: 1.0)
Twice the Width
(Aspect: 2.0)
One-half the Width
(Aspect: 0.5)