Chyron infinit! series, Operation Manual

Page: 208 / 978

CHYRON Corporation
Message Compose Basics 6-20 Revision D
The following sample font listing (Figure 6-7) shows
how the parameters are specified in a list:
Figure 6-7. Sample Font Listing
NOTE
When working in Flash Font (Section
13) or the Font Create Utility (Section
18), Drop Shadow is called “Shadow”.
ID: The numeric range is from 0 to 9999 inclusive. Use the
"
-
" to list an inclusive range (example,
100-199
). Use the
" * " to list all fonts beginning or ending with, or contain-
ing a particular number. For example, entering 1* lists
all fonts with IDs beginning with " 1 ", whereas entering
*82
would list all fonts with IDs ending in "
82
", such as
1082 , 2182 , etc. Entering *2* lists font ID’s such as
0123
,
0200
, etc.
Name:
The name can be alphabetical and/or numeric. In the
example above, list all Deco fonts by entering
Deco* .
Narrow it to a type of Deco by entering
Deco 901*
. The
system searches for all fonts beginning with Deco 901 .
Entering
Broadway*
would NOT list Deco Broadway
fonts.
The " - " or " * " can also be used in the Name: field. To list
the Broadway fonts, for example, enter
*Broadway*
.
0012 DECO 901 BROADWAY/HEAD (TM)
80 scanlines Drop Shadow 8 lines left
ID
SIZE
EDGE
NAME